Suffix code

Model Code Description
TH510- Programmable temperature/Humidity controller
Display 1     Display(5.7" TFT LCD)
N     None
Input/output 1   8 input points/6 output points(1 module)+Power module+Control module
2   8 input points/14 output points(2 modules)+Power module+Control module
3   16 input points/16 output points(3 modules)+Power module+Control module
N   No input/output
Language S Korean, English, and Chinese(Simplified)
T Korean, English, and Chinese(Traditional)
※ This product consists of the display and control(power, control, input, and output modules)
   (Up to 32 contact input/output points, respectively)

[Components]
Product Model Description
Display TH510-1N Display(5.7" TFT LCD)
Control module TH510-MAIN Temperature•Humidity control module
Power module TM-PWR Power module
Input module TM-DI Module with 16 input points
Output module TM-DO Module with 8 output points
Input/output module TM-DIO Module with 8 input and 6 output points

Specification

[input]
Input type 2 types of thermoresistor (Pt-100, KPt-100), 2 types of DC voltage (1 - 5 V, 0 - 30 V)
Sampling cycle 250 ㎳
Measured current of thermoresistor(RTD) Approx. 0.21 mA
Input resistance Input resistance
Allowable wire resistance RTD : Max. 10Ω/wire, DC voltage : 2 ㏀ or less
Influence of wire resistance RTD±0.3 ℃/10 Ω (3 wires must have the same wire resistance)
Allowable input voltage DC voltage : ±33 V DC or less
Detection of sensor disconnection(Burn-out) UP-Scale for disconnection

[Performance]
Marking accuracy Temperature(℃) : ±0.1% ±1 digit of Full Scale, humidity : ±1% ±1 digit of Full Scale
Insulation resistance 20 ㏁ or 500 V DC between power and FG terminals
internal pressure
Between 1st and 2nd terminals : Min. 1500 V AC for 1 min
Between 1st and FG terminals : Min. 1500 V AC for 1 min
Between 2nd and FG terminals : Min. 1500 V AC for 1 min
( 1st terminals : Power terminal (except FG terminal) and relay output terminal
2nd terminals : Sensor input terminal, contact input terminal, communication terminal)

[General Specifications]
Power voltage 100 - 240 V a.c.
Voltage fluctuation rate ± 10% of supply voltage
Power Consumption 25 VA (Based on TH510-13)
Ambient temperature 0 ~ 50 ℃
Ambient humidity 20 ~ 90 % RH (However, no condensation)
Ambient temperature -25℃ ~ 70℃
Internal vibration 10 - 55 Hz, Amplitude 0.75 mm, 4 directions in 3 directions, 5 minutes / cycle
Internal shock 147 m/s², 3 times in 3 directions
Dimensions
Display : 145(W) X 145(H) X 42.3(D), Power module : 50(W) X 107(H) X 112(D)
Control module : 40(W) X 107(H) X 112(D)
Weight 1.79 Kg (Based on TH510-13)

[Control function]
Input Input calibration(Sensor bias) 1 Temperature contact : EUS(0~100 %)
1 Humidity contact : EUS(0 ~ 100 %)
Dry/wet-bulb sensor compensation Compensate the dry/wet sensor difference after removing the gauze of the wet-bulb sensor.
Scaling DC voltage(VDC) : Input scaling according to conversion range
Input filter(LPF) 0 ~ 120 sec
Control mode Operation type Constant-value / Program control
Control output Temperature control output SSR output or SCR (4 - 20 mA DC) output
Humidity control output
Control operation Pattern 100 patterns(1 pattern/100 segments)
Segment 2000 segments
Group 16 groups(temperature 4 zones X humidity 4 zones)
Auto tuning 16 groups(temperature 4 zones X humidity 4 zones)
Proportional band 0.00 ~ 100.00 % (For 0.00 %, ON/OFF control)
Integral time 0.0 ~ 3,000 sec (OFF when 0 sec)
Derivative time
ON/OFF control Set 0.0 to proportional band(PB)
Normal Open/Normal Close According to selection of Normal Open/Normal Close for control output
Hysteresis EUS (0 ~ 100 %)
Transmission output Temperature, Humidity Current output(4 - 20 ㎃ d.c.)
Select between indication value (PV), set value (SV), and output amount (MV)
Scaling Auto scaling for defined upper/lower limit range (4 - 20 mA DC)
Alarm setting Alarm setting System alarm : 8 points
Assign 4 of 8 pattern alarms to a pattern
Alarm type Absolute high/low limit, deviation high/low limit, in range/out of range (alarm direction, hold)
Absolute alarm setting range EU (0 ~ 100 %)
Offset information setting range EUS (-100 ~ 100 %)
Hysteresis EUS (0 ~ 100 %)
Memory specifications Internal memory Nonvolatile flash memory (80 MB)
External memory SD card(2 GB) : Saving of 1 year at 1 S interval
Saving interval 1 ~ 360
Memory information Program information, setting value, recovery, and temperature setting/specific/output value

[Display specifications]
Display TFT color LCD (115.2 × 86.4 mm)
Number of Pixels 640 X 480 Pixel
Back light LED Back light
Life cycle of back light Approx. 40,000 h
Touch type Resistive type (4 Wires)
Language Korean/English/Chinese(Simplified)

[Output specifications]
Contact output(DO) Up to 32 relay A Contact 30 V d.c. 3 A max, 250 V a.c. 3 A
B Contact NO : 30 V d.c. 5 A max. 250 V a.c. 5 A
NC : 30 V d.c. 1 A max. 250 V a.c. 5 A
Control output SSR output ON : 18 V DC Pulse voltage(800 Ω or more load resistance)
SCR output 4 - 20 mA DC (600 Ω or less load resistance)
Transmission output Current output 4 - 20 ㎃ d.c
Load resistance 600 Ω or less load resistance
Output limit -5.00 ~ 105.00 %
Output type Specific value(PV), Setting value(SV), Output(MV), and random
Refresh interval 250 ㎳

[Contact input]
Input score Up to 32 points
Input signal Non-voltage contact input
Operating condition Running / Always

[Communication specifications]
Applied standard RS485
Max. connection number 1:32 (address 1 ~ 99)
Communication type 2-wire
Synchronization Asynchronous
Communication distance Approx. 1.2 km or less
Communication speed 9600, 19200, 38400, 57600, 115200 bps
Data Length 7/8 Bits
Parity Bit NONE / EVEN / ODD
Stop Bit 1 / 2 Bit(s)
Protocol PC-Link / PC-link + SUM / MODBUS ASC / MODBUS RTU
Response Time 0 ~ 100 ㎳

[Range configuration by input type ]
Input type Temperature Humidity
Measuring range (℃) accuracy Measuring range
(%RH)
accuracy
Thermoresistor (RTD) Pt100 Ω Pt-1 -100.0 ~ 300.0 ±0.1 % of FS
±1 Digit
0.0 ~ 100.0 ±1 % of FS
±1 Digit
Pt-2 -100.00 ~ 150.00
KPt100 Ω KPt-1 -100.0 ~ 300.0
KPt-2 -100.00 ~ 150.00
DC voltage (VDC) 1 - 5 V -100.0 ~ 300.0 ±0.1 % of FS
±1 Digit
0 - 30 V -100.0 ~ 300.0