Suffix code

Model Code Information
GR200 - Graphic recorder 145(W) x 145(H) x 173.5(D) ㎜
Number of channels 2     2 channel
4     4 channel
8     8 channel
12     12 channel
External contact
input & output
(DI / DO)
N   None
1   DI 2 contact + DO 6 contact (relay)
2   DI 4 contact + DO 12 contact (relay)
Communication 0 RS422/485
※ Ethernet is available when using our ethernet converter(HMCE).

Specification

[ Range configuration for the input types ]
Input type Measurement range(°C) Measurement range(°F) Degree
Thermoresistor (RTD) Pt100Ω Pt-0 -200 ~ 640 -300 ~ 1180 ±0.15 % of F.S ±1digit
Pt-1 -1 -200.0 ~ 640.0 -300.0 ~ 1180.0
Pt-2 -200.00 ~ 640.00 -300.0 ~ 1180.0
KPt100Ω KPt-0 -200 ~ 500 -300 ~ 1000
KPt-1 -200.0 ~ 500.0 -300.0 ~ 1000.0
KPt-2 -100.00 ~ 150.00 -300.0 ~ 1000.0
Thermocouple (TC) K K-0 -200 ~ 1370 -300 ~ 2500 ±0.15 % of F.S ±1digit
K-1 -200.0 ~ 1370.0 -300 ~ 2500 ±0.15 % of F.S ±1digit(*2)
J -200.0 ~ 1200.0 -300 ~ 2300 ±0.15 % of F.S ±1digit(*2)
E -200.0 ~ 1000.0 -300 ~ 1800 ±0.15 % of F.S ±1digit(*2)
T -200.0 ~ 400.0 -300 ~ 750 ±0.15 % of F.S ±1digit(*3)
R 0.0 ~ 1700.0 0 ~ 3100 ±0.15 % of F.S ±1digit(*4)
B 0.0 ~ 1800.0 0 ~ 3300 ±0.15 % of F.S ±1digit (*1)
S 0.0 - 1700.0 0 ~ 3100 ±0.15 % of F.S ±1digit(*4)
L -200.0 ~ 900.0 -300 ~ 1300 ±0.15 % of F.S ±1digit(*2)
N -200.0 ~ 1300.0 -300 ~ 2400 ±0.15 % of F.S ±1digit(*3)
U -200.0 ~ 400.0 -300 ~ 750 ±0.15 % of F.S ±1digit(*3)
Wre 5-26 0.0 ~ 2300.0 0 ~ 4200 ±0.15 % of F.S ±1digit(*4)
PL-Ⅱ 0.0 ~ 1390.0 0 ~ 2500 ±0.15 % of F.S ±1digit
VDC -10 - 20 ㎷ -10.00 ~ 20.00 ±0.15 % of F.S ±1digit
* The current input (4~20㎃ DC)
is available when you use resistance 250Ω (0.5W/0.1%)
on input terminals
0 - 100 ㎷ 0.00 ~ 100.00
1 - 5 V 1.00 ~ 5.00
0 - 30 V 0.00 ~ 30.00
 (*1) 0 ~ 400℃ : ±5% of F.S ± 1digit  (*3) -200 ~ -150℃ : ±0.4% of F.S ± 1digit
 (*2) -200 ~ -150℃ : ±0.2% of F.S ± 1digit        -150 ~ -100℃ : ±0.2% of F.S ± 1digit
   (*4) 0 ~ 200℃ : ±0.2% of F.S ± 1digit

[ Specification for the input ]
VDC Thermocouple (TC) K, J, E, T, R, S, B, N IEC 584
PL-Ⅱ, Wre 5-26 ASTM E988
U, L DIN 43710, IEC 751
Thermoresistor (RTD) Pt100 Ω DIN IEC 751
KPt100 Ω JIS C1604-1989 (OLD)

[Power input]
Power voltage 100 - 240 V AC Voltage fluctuation rate ±10 %
Power frequency 50 - 60 ㎐
Power consumption 22 VA max
Maximum internal fuse ratings 250 V AC
Internal voltage Primary terminal* and secondary terminal** : Minimum 1500 VAC for 1 minute
Primary terminal* and FG terminal : Minimum 1500 VAC for 1 minute
Secondary terminal** and FG terminal : Minimum 1500 VAC for 1 minute
Secondary terminal** and secondary terminal** : Minimum 500 VAC for 1 minute
* Primary terminal : Power terminal (except the FG terminal) and the relay output terminal
** Secondary terminal : Sensor input terminal, contact input terminal, communication terminal
Insulation resistor 20 ㏁ between the power terminal and the FG terminal or 500 VDC

[Sensor input]
Number of channels 2, 4, 8, 12 (Refer to the type configuration)
Input type 2 thermoresistors (Pt-100, KPt-100) 12 thermocouples (K, J, E, T, R, B, S, L, N, U, Wre 5-26, PL-II) 4 VDC (-10 - 20 mV, 0 - 100 mV, 1 - 5V, 0 - 30 V)
Sampling period 250 ㎳
Current to measure the thermoresistor (RTD) About 0.21 ㎃
Input resistor Thermocouple : More than 1 ㏁, VDC : More than 1 ㏁
Allowable wiring resistor Thermoresistor : Maximum 100Ω/wire (The RTD is up to 10Ω/wire for the range of -100.00 - .150.00) Thermocouple : Less than 200 Ω VDC : Less than 2 ㏀
Impact of the wiring resistor Thermoresistor : ±0.3 °C/10 Ω (The 3 lines have the same wiring resistors)
Allowable input voltage Thermocouple : Less than ±10 V DC, VDC : Less than ±33 V DC
Degree ±0.15 % of F.S, ±1 digit (Except the RJC temperature error) ※ Refer to the input table
The error in the reference junction compensation (RJC) ±2.0 ℃ (0 ~ 50 ℃)
Sensor short detection (Burn-out) UP-Scale for the short

[Contact input]
Maximum input 4
Input method No voltage contact input
On/Off detection resistor Consider on less than 1 ㏀ minimum and off larger than 10 ㏀
Minimum detection time 0.25 second

[Alarm output]
Maximum number of outputs 12
Output type Relay output
Maximum ratings 5 A 250 V AC, 5 A 30 V DC
Recommended ratings 3 A 250 V AC, 3 A 30 V DC
Relay life 50,000 times at the maximum ratings, 100,000 times at the recommended ratings

[Display specification]
Display TFT color LCD
(115.2 × 86.4 ㎜, resolution : 640 × 480 pixel, LED Backlight)
Backlight life 40,000 hours

Language in use

Korean, English, Chinese (simplified)

[Memory specification]
Save function Internal memory - volatile memory : 900 KB - Save up to 4 hours with the interval of 1 second - Non-volatile memory : 80 MB . Save up to 15 days with the interval of 1 second External memory - SD card (2GB) : Save up to a year with the interval of 1 second ※ Support the SDHC
Save period User configuration (1, 2, 5, 10, 20, 30, 60, 120 seconds)
Memory information Measurement from each channel, Burn-out, DI (contact input), ALARM, relay output status

[Use environment]
Ambient temperature 0 ~ 50 °C
Temperature change 10 °C/h or below
Ambient humidity 20 ~ 90 % RH (no condensation)

[Storage environment]
Ambient temperature -20 ~ 70 °C
Temperature change Less than 20 °C/h
Ambient humidity 5 - 95 % RH (no condensation)

[Impact from the ambient temperature]
VDC, thermocouple sensor ±0.01 % of F.S / °C
Thermoresistor sensor ±0.06 °C/°C