Suffix code

 Model Code Information
UP -

inductive type proximity sensor

Sensing
area size
8           M8
12           M12
18           M18
30           M30
Structure type RM         Round type Shield
RD         Round type None Shield
RLM         Long round type shield(M8 and M12 are excluded)
RLD         Long round type None shield (M8 and M12 are excluded)
Sensing Distance 1.5       Only for UP8-RM1.5
2       Only for UP8-RD2, UP12-RM2
4       Only for UP12-RD4
5       Only for UP18-RM5, UP18-RLM5
8       Only for UP18-RD, UP18-RLD
10       Only for UP30-RM10, UP30-RLM10
15       Only for UP30-RD15, UP30-RLD15
Power and Output type N     D.C NPN output
P     D.C PNP output
A     A.C 2 wire type
T     D.C 2 wire type(Polarity)
U     D.C 2 wire type(No polarity) ※ But M8 is excluded
Output state A   Normal open(N.O)
C   Normal close(N.C)
Connection structure * No indication (Cable type)
CR Relay connector type
C Connector type
※ M8 (Ø8) is only available with the cable type

Specification

Inductive D.C 3 Wire type
Model NPN UP8RM-1.5N UP8RD-2N UP12RM-2N UP12RD-4N UP18RM-5N UP18RD-8N
PNP UP8RM-1.5P UP8RD-2P UP12RM-2P UP12RD-4P UP18RM-5P UP18RD-8P
Size M8 M12 M18
Shield Shield None shield Shield None shield Shield None shield
Standard sensing object (mm) Iron 8 X 8 X 1 Iron 12 X 12 X 1 Iron 18X18X1 Iron 25 X 25 X 1
Sensing distance 1.5 mm 2 mm 2 mm 4 mm 5 mm 8 mm
Setting distance 0 ~ 1.2 mm 0 ~ 1.6 mm 0 ~ 1.6 mm 0 ~ 3.2 mm 0 ~ 4 mm 0 ~ 6.4 mm
Hysteresis Less than 10% of sensing distance
Response frequency 800 Hz 800 Hz 400 Hz 350 Hz 200 Hz
Power supply voltage 12 ~ 24 V d.c (Usable voltage range 5 - 35V d.c)
Control output Open/Close capacitance : 200 mA Max. (Resistive load), Residual voltage : Max 1.5 V
Current consumption Max 6 mA
Operation indication Red LED
Protective circuit Power reversely comeded prodective circuit,
surge prote ctive circuit and over current protective circuit are built in.
connection structure Cable type (standard cable length 2m), Relay connector type, Connector type
Material Case: stainless, Sensing surface: PBT, Cable holder: Polyester elastomer Case: brass(chrome plating), Sensing surface: PBT,
Cable holder: Polyester elastomer
Weight Cable type approx. 60g approx. 60g approx. 70g approx. 70g approx. 120g approx. 120g
Relay connector type None None approx. 30g approx. 30g approx. 80g approx. 80g
Connector type None None approx. 30g approx. 30g approx. 60g approx. 60g

Inductive D.C 3 Wire type
Model NPN UP18RLM-5N UP18RLD-8N UP30RM-10N UP30RD-15N UP30RLM-10N UP30RLD-15N
PNP UP18RLM-5P UP18RLD-8P UP30RM-10P UP30RD-15P UP30RLM-10P UP30RLD-15P
Size M18 M30 M30
Shield Shield None shield Shield None shield Shield None shield
Standard sensing object (mm) Iron 18 X 18 X 1 Iron 25 X 25 X 1 Iron 30 X 30 X 1 Iron 45 X 45 X 1 Iron 30 X 30 X 1 Iron 45 X 45 X 1
Sensing distance 5 mm 8 mm 10 mm 15 mm 10 mm 15 mm
Setting distance 0 ~ 4 mm 0 ~ 6.4 mm 0 ~ 8 mm 0 ~ 12 mm 0 ~ 8 mm 0 ~ 12 mm
Hysteresis Less than 10% of sensing distance
Response frequency 350 Hz 200 Hz 250 Hz 100 Hz 250 Hz 100 Hz
Power supply voltage 12 ~ 24 V d.c (Usable voltage range 5 - 35V d.c)
Control output Open/Close capacitance : 200 mA Max. (Resistive load), Residual : Max1.5 V
Current consumption Max 6 mA
Operation indication Red LED
Protective circuit Power reversely connected protective circuit,
Surge protective circuit and over current protective circuit are bult in.
connection structure Cable type (standard cable length 2m), Relay connector type, Connector type
Material Case : brass(chrome plating), Sensing surface: PBT, Cable holder: Polyester elastomer
Weight Cable type approx. 140g approx. 140g approx. 170g approx. 170g approx. 220g approx. 220g
Relay connector type approx. 100g approx. 100g approx. 130g approx. 130g approx. 180g approx. 180g
Connector type approx. 80g approx. 80g approx. 150g approx. 150g approx. 200g approx. 200g

Inductive D.C 2 wire type (Polrity/No polarity)
Model Polarity UP8RM-1.5T UP8RD-2T UP12RM-2T UP12RD-4T UP18RM-5T UP-18RD-8T
Non Polarity - - UP12RM-2U UP12RD-4U UP18RM-5U UP-18RD-8U
Size M8 M12 M18
Shield Shield None shield Shield None shield Shield None shield
Standard sensing object (mm) Iron 8 X 8 X 1 Iron 12 X 12 X 1 Iron 18X18X1 Iron 25X25X1
Sensing distance 1.5 mm 2 mm 2 mm 4 mm 5 mm 8 mm
Setting distance 0 ~ 1.2 mm 0 ~ 1.6 mm 0 ~ 1.6 mm 0 ~ 3.2 mm 0 ~ 4 mm 0 ~ 6.4 mm
Hysteresis Less than 10% of sensing distance
Response frequency 800 Hz 800 Hz 400 Hz 350 Hz 200 Hz
Power supply voltage 12 ~ 24 V d.c (Usable voltage range 10 - 30 V d.c)
Control output Open/Close capacitance : 100 mA Max.(Resistive load),
Residual voltage: T (polarty) : max 3.5 V, U (No polarity): max5V
Leakage current Max 1 mA
Operation indication Red LED
Protective circuit Power reversely connected protective circuit,
surge protective circuit and over current protective circuit are built in.
connection structure Cable type(standard cable length 2 m), Relay connector type, Connector type
Material Case: stainless, Sensing surface:PBT, Cable holder: Polyester elastomerr Case: brass(chrome plating), Sensing surface: PBT, Cable holder: Polyester elastomer
Weight Cable type approx. 60g approx. 70g approx. 120g approx. 120g
Relay connector type None approx. 30g approx. 80g approx. 80g
Connector type None approx. 30g approx. 60g approx. 60g

Inductive D.C 2 wire type
Model Polarity UP18RLM-5T UP18RLD-8T UP30RM-10T UP30RD-15T UP30RLM-10T UP30RLD-15T
Non Polarity UP18RLM-5U UP18RLD-8U UP30RM-10U UP30RD-15U UP30RLM-10U UP30RLD-15U
Size M18 M30 M30
Shield Shield None shield Shield None shield Shield None shield
Standard sensing object (mm) iron 18 X 18 X 1 iron 25 X 25 X 1 iron 30 X 30 X 1 iron 45 X 45 X 1 iron 30 X 30 X 1 iron 45 X 45 X 1
Sensing distance 5 mm 8 mm 10 mm 15 mm 10 mm 15 mm
Setting distance 0 ~ 4 mm 0 ~ 6.4 mm 0 ~ 8 mm 0 ~ 12 mm 0 ~ 8 mm 0 ~ 12 mm
Hysteresis Less than 10% of sensing distance
Response frequency 350 Hz 200 Hz 250 Hz 100 Hz 250 Hz 100 Hz
Power supply voltage 12 ~ 24 V d.c (Usable voltage range 10 - 30 V d.c)
Control output Open/Close capacitance : 100 mA Max. (Resistive load),
Residual voltage: T(Polarity) : max 3.5 V, U(No polarity) :max 5 V
Leakage current Max 1 mA
Operation indication Red LED
Protective circuit Power reversely connected protective circuit,
surge protective circuit and over current protective circuit are built in.
connection structure Cable type(standard cable length2 m), Relay connector type, Connector type
Material Case: brass(chrome plating), Sensing surface: PBT, Cable holder : Polyester elastomer
Weight Cable type approx. 140g approx. 140g approx. 170g approx. 220g
Relay connector type approx. 100g approx. 100g approx. 130g approx. 180g
Connector type approx. 80g approx. 80g approx.110g approx. 200g

Inductive A.C 2 wire type
Model For A.C UP12RM-2A UP12RD-4A UP18RM-5A UP18RD-8A UP18RLM-5A
Size M12 M18 M18
Shield Shield None shield Shield None shield Shield
Standard sensing object (mm) Iron 12 x 12 x 1 mm Iron 18 x 18 x 1 mm Iron 25 x 25 x 1 mm Iron 18 x 18 x 1 mm
Sensing distance 2 mm 4 mm 5 mm 8 mm 5 mm
Setting distance 0 ~ 1.6 mm 0 ~ 3.2 mm 0 ~ 4.0 mm 0 ~ 6.4 mm 0 ~ 4.0 mm
Hysteresis Less than 10% of sensing distance
Response frequency 20 Hz
Power supply voltage 100 ~ 240 V a.c(Usable voltage range 90 - 250 V a.c)
Control output Open/Close capacitance : 200 mA Max. (Resistive load), Residual voltage: Max 10 V
Leakage current Max 2.2 mA
Operation indication Red LED
Protective circuit Surge Protective circuit built in.
connection structure Cable type(standard cable length 2 m), Relay connector type, Connector type
Material Case: brass (chrome plating), Sensing surface:PBT, Cable holder :Polyester elastomer
Weight Cable type approx. 70g approx. 70g approx. 120g approx. 140g
Relay connector type approx. 30g approx. 30g approx. 80g approx. 100g
Connector type approx. 30g approx. 30g approx. 60g approx. 80g

Inductive A.C 2 wire type
Model For A.C UP18RLD-8A UP30RM-10A UP30RD-15A UP30RLM-10A UP30RLD-15A
Size M18 M30 M30
Shield None shield Shield None shield Shield None shield
Standard sensing object (mm) Iron 25 x 25 x 1 mm Iron 30 x 30 x 1 mm Iron 45 x 45 x 1 mm Iron 30 x 30 x 1 mm Iron 45 x 45 x 1 mm
Sensing distance 8 mm 10 mm 15 mm 10 mm 15 mm
Setting distance 0 ~ 6.4 mm 0 ~ 8.0 mm 0 ~ 12.0 mm 0 ~ 8.0 mm 0 ~ 12.0 mm
Hysteresis Less than 10% of sensing distance
Response frequency 20 Hz
Power supply voltage 100 ~ 240 V a.c(Usable voltage range 90 - 250 V a.c)
Control output Open/Close capacitance : 200 mA Max. (Resistive load), Residual voltage: Max 10 V
Leakage current Max 2.2 mA
Operation indication Red LED
Protective circuit Surge Protective circuit built in.
connection structure Cable type(standard cable length 2 m), Relay connector type, Connector type
Material Case: brass (chrome plating), Sensing surface:PBT, Cable holder :Polyester elastomer
Weight Cable type approx. 140g approx. 170g approx. 170g approx. 220g approx. 220g
Relay connector type approx. 100g approx. 130g approx. 130g approx. 180g approx. 180g
Connector type approx. 80g approx. 150g approx. 150g approx. 200g approx. 200g