Suffix code

Model Code Information
PFD - 10 bit A/D, 4Digit display
Light source R     Red LED
Use G   General purpose(MARK)
M   Multi type(MARK / RPM / COUNTER)
External output N NPN Open collector
P PNP Open collector

Specification

Type Digital Multi Control Type
General purpose Multi function
Appearance
Model NPN PFD-RGN PFD-RMN
PNP PFD-RGP PFD-RMP
Rated Voltage 12 - 24 V d.c ± 10 % (Ripple 10 % Max.)
Current Consumption 50 mA Max.
Output Main Open collector output, 100 ㎃ (Supplied voltage Max. 30 V, Residual voltage Max. 0.5 V)
Subsidiary Open collector output, 100 ㎃ (Supplied voltage Max. 30 V, Residual voltage Max 0.5 V)
External Input Teaching / Auto teaching Teaching / Auto teaching / Reset input
Operating mode
Light On / Dark On output
Normal output, ON DELAY, OFF DELAY, ON/OFF DELAY output
On/Off Delay 0 ~ 9999 ms
Light source Red emitting diode / 660 ㎚
Protection circuit Reverse polarity protection, Overcurrent protection
Response time Max. 700 ㎲ Max. 1 ㎳
LED indicator 7 points status LED, 4 Digits FND
Sensitivity control Auto-teaching, Manual
Additional functions
Brightness control 180。 Turning indication
Display time set, Zero Reset, Initial reset, Lock function
Ambient illumination Sunlignt : 10,000 Lux Max., Incandescent lamp : 3,000 Lux Max.
Ambient temperature Operating : -10 °C ~+55 °C , Storage : -25 °C ~ +70 °C (Without freezing)
Ambient humidity 35 ~ 85 % R.H.
Vibration Resistance 10-55 Hz(Cycle for 1 minute),Double amplitude : 1.5 mm, in each direction X•Y•Z for 2 hours
Shock Resistance 500 ㎨ (About 50 G), X·Y·Z each direction for 3 times
Dielectric Strength 1500 V a.c (50/60 ㎐) for 1 minute
Insulation Resistance Min. 20 ㏁ (at 500 V d.c)
Connection Method For DIN Rail attachment Flying lead 1.5 m
5 P
Accessory Bracket